Drum Deheader

Drum Deheader

• All parts are drop forged and heat treated

• Cuts the heads out of steel drums without leaving dangerous edges

• Blade and fulcrum are detachable

• For initial cut, the tool has a point in the rear and a striking surface in front

• Available with either alloy blade or non-sparking blade

Drum Deheader Operating Instructions:

1) Open handles, place blade on top of steel drum so that pivot is on outside, below lip of drum,      

    close handles.

2) Pry down so point of blade pierces lid. If needed, while prying down, strike back of blade with    

    hammer.

3) Lift handle slightly, slide deheader forward, pry downwards to cut lid further.